Creating an SMTP receive connector

The SMTP receive connector defines on which IP address and which port emails are received by NoSpamProxy. It also determines how invalid requests from external email servers are handled and what connection security should be applied when transporting emails.

1. Go to Configuration > Email routing > Receive connectors and click Add.
2. Select SMTP as type.
3. Set the Gateway Roles of the receive connector, the IP address and the port of the connector. Please refer to the notes under Mehrfach verwendete Einstellungen bei Konnektoren.
4. For an address binding to a specific address, specify the IP address at which the connections are to be accepted.
   

   NOTE: If you have selected multiple Gateway Roles, you cannot perform a binding to individual IP addresses. In this case select All or Loopback.

5. For Port, specify the port at which NoSpamProxy should receive emails and click Next.
6. Make the settings for invalid requests. Please refer to the notes under Invalid requests for SMTP receive connectors.
7. Make the settings for connection security. Please refer to the notes under Mehrfach verwendete Einstellungen bei Konnektoren.
8. Click Finish.