Step 1: Installation

NOTE: You must install all smart card components from the server console. Installation via a remote desktop connection will result in an incorrect installation.

Notes on using USB servers

  • Make sure that you use a dedicated and permanently configured IP address (no DHCP) for the USB server.
  • Be sure to include the USB ports in the guest system.
  • To have the USB server automatically connected when the operating system starts, you must add the USB server integration to the autostart list.

Smartcard

Installing the smartcard driver

To access the smartcard, first install the driver for the TCOS (TeleSec Chipcard Operating System). Use the TCOS card module driver for manual installation.

  1. Download the TCOS card module driver.
  2. Unpack the ZIP archive.
  3. Install the driver.

NOTE: After installation, make sure that the smart card is visible in the Device Manager and is shown as correctly installed.

Installation of the TCOS Cardmanager

Now install the Cardmanager software as follows

  1. Download the TeleSec Cardmanager .
  2. Unpack the ZIP archive.
  3. Install the software.

Next steps

After installation, continue with the following steps:

Step 2: Configuration

Step 3: Configuring the De-Mail connection in NoSpamProxy